Touch-Aluminum Profile LED Sensor Switch-TD011!

Product Parameters:

Connection Guidance:

Product Description:

• Power the light on the 1st time, with the brightness and power state of last time (If dimming, the light will brighten from current brightness to 100% ), the light enters dimming mode automatically when putting the hand on any position of the aluminum profile for 2s, brightening from 6% to 100%, or dimming from 100% to 6%.
  
• Fast touch: light off; Fast touch again: light on.
  
• This sensor will memorize the status of the dimming in DC0V(Power off) or DC12V-24V.

• The power supply must be Class I (With a grid ground wire).This sensor can only be connected with single line for LED strip.
• In the case of manufacturing finished light, the LED strip must be insulated from the aluminum profile (Insula􀀁ng materials’ thickness ≥ 2MM).
  
• Available finished LED light length≤1.5M.
  
• Aluminum profile inner space should be at least 2MM wider than LED strip PCB.
  
• Suitable for our aluminum Profile for single finger touch: F001, F002, A2515, A2212.
  
• Suitable for our aluminum Profile for two fingers touch: F003, A1506, A1707, A1612, A2206, A1713, A2016, A1919, B1919, C1919, C1506, B1707.

Product Installation:

* Note: The function/program can be customized, made upon different needs, such as longer time for stay on, etc.

Product Certificatation:

Relative micro PIR sensor motion sensor 12v/24v for led strip led aluminum profile

Email:sales@surmountor.com