Panier
Votre panier est vide.
Continuer vos achatsIR001D IR Hand Sensor Switch with dimming and memory function
- $3.50
IR001D IR Hand Sensor Switch with dimming and memory function
- $3.50
Motion LED IR Sensor Hand Wave Dimmer Sensor Switch IR Sensor PCB Module IR Hand Touch Dimming Sensor Light Switch With Memory Function
Email:sales@surmountor.com
Product Description:
- LED strip is originally “off” and the LED indicate light on the sensor PCB is “on” when the power is connected on.
- The light will be on when hand passing over the IR sensor switch within 10cm detection range, and will be off when hand passing over again.
- Hold the hand over the IR sensor more than 3s, to adjust the LED brightness dimming from 1% to 100%.
- The IR sensor will memorize the status of the LED brightness in 12V–24VDC.
- The IR sensor switch will turn on or off the led light with above repeatable steps.
Product Parameters:
| Input Voltage | 12-24V | Dimension | 55mm x 10mm. |
| Current | 8A | Watt | 96W (12V); 192W(24V) |
| Detection Range | 0.5cm≤Detection Range≤10cm | Certificated | CE, RoHS |
| PCB Color | Blue | Function | Automatically switch ON/OFF when the hand pass over, dimming and memory function. |
Product Installation:
The two IR diodes head should be put out of PC cover as the picture below:
Step 1: Drill 2 holes with a diameter of 5mm in PC cover.
Step 2: Place the detector heads into the holes with a diameter of 5mm.
Step 3: Connect wires to the input end and output end of the conctrol PCB.
Step 1: Drill 2 holes with a diameter of 5mm in PC cover.
Step 2: Place the detector heads into the holes with a diameter of 5mm.
Step 3: Connect wires to the input end and output end of the conctrol PCB.
Connection Guidance :
Product Certificatation:
Relative micro PIR sensor motion sensor 12v/24v for led strip led aluminum profile
Packing & Delivery:
Custom Packing and Custom Label are available as request !
Email:sales@surmountor.com
- Vendor: Surmountor Lighting CO., Limited